Partners

American DJ

FLASH  Kling Panel 64

Flash Kling Panel

Specifications:
- Light Source: 64 x 0.164W, SMD RGB LEDs, (Rated at approximately 50,000 hours)
- Operational Mode: KlingNet and ArtNet compatible. Recommended control solutions; Arkaos Media Master Express, Media Master Pro and LED Master software’s (sold separately).
- Beam Angle: 120-Degrees
- Luminance: N/A
- Kling Net Control: Yes
- Art-Net Control: Yes
- RJ45 Connection: Yes In/Out
- DMX Connections: No
- Dimming: Electronic 0-100% (via software)
- Flicker Free: Yes

Illusion Dotz 3.3

Ilussion Dotz 3

Take your light show to a new dimension with the ADJ Illusion Dotz 3.3, a Moving Head wash fixture with nine 30W Chip On Board (COB) pixel controllable TRI LEDs. Its 360/540-degree pan and 270-degree tilt allow for the beams of light to move and spin, creating added excitement to any lightshow.

Add more eye candy to your lightshow with the Dotz Illusion 3.3’s stunning effects from the on-board 3x3 Pixel Mapping capabilities. Because the fixture is Artnet/Klingnet compatible, designers may project low-res video content through the RJ45 connections on the back of the unit. 

The Illusion Dotz 3.3 is a smaller, more compact, footprint compared to the ADJ Illusion Dotz 4.4 making it great for nightclubs, mobile entertainers and productions, stages and churches.

The Illusion Dotz 3.3 has a 15-degree beam angle, 3 operational modes, 3 DMX channel modes and 5 dimming curve settings. The full color digital display allows for easy navigation through the fixture’s functions.
 

Illusion Dotz 4.4

Ilussion Dotz 4

Take your light show to a new dimension with the ADJ Illusion Dotz4.4, a Moving Head wash fixture with sixteen 30W Chip On Board (COB) pixel controllable TRI LEDs. Its 360/540-degree pan and 270-degree tilt allow for the beams of light to move and spin, creating added excitement to any lightshow.Add more eye candy to your lightshow with the Dotz Illusion 4.4’s stunning effects from the on-board 4x4 Pixel Mapping capabilities. Because the fixture is Artnet/Klingnet compatible, designers may project low-res video content through the RJ45 connections on the back of the unit.The Illusion Dotz 4.4 has a 15-degree beam angle, 4 operational modes, 3 DMX channel modes and 5 dimming curve settings. The full color digital display allows for easy navigation through the fixture's functions.

LED Pixel Kling 10C

LED Pixel Kling 10C

Specifications:
- 10-Channel Pixel Tube Driver with KlingNet and DMX Protocols.
- Controls up to 10 Tubes
- 5 Operating Modes: RGB Dimmer Mode, Sound Active Mode, Auto Run Mode, Static Color Mode, & DMX Control
- 4 DMX Channel Modes: 5/7/32/480
- 8 Static Colors
- 49 Auto Run Shows: 24 Color Fade, 24 Color Change, 1 Fade & Change
- 24 Sound Active Shows
- Strobing Slow – Fast
- Dimming 0% - 100%
- Display Brightness Control
- IEC AC IN/OUT Daisy chain power (up to 3pcs.)
- Compativle with IR Wireless remote ADJ WR Controller/LED RC (not included)
- Power Consumption: 200W
- Voltage Operation: AC 120V/60Hz or 240V/50
- Dimensions: (LxWxH): 318 x 280 x 80mm
- Weight: 4.5 kg
   Specifications subject to change without notice

Ultra Kling Bar 18

Ultra Kling Bar

The ADJ Ultra Kling Bar 18 is a 1-meter linear fixture with 18x 3-Watt TRI LEDs. It features individual pixel control allowing for this product to be used in conjunction with Arkaos Kling-Net software to project low-res video across one or multiple fixtures. It may also be used as a traditional linear wash for uplighting and stage lighting utilizing 5 operational modes, 7 DMX channel modes, 14 built-in programs and 32 built-in color macros.

3D Vision

3D Vision​​

Hexagonal shaped LED panel with stunning 3D visual effects when used in multiples. Designed for nightclubs, lounges, bars, entertainment centers, stages and mobile entertainers. Controllablevia DMX. Can also be used with EZ Kling interface for Artnet and KlingNet, LED Master control. Link multiple panels together via powerCon input/output with RJ45 ports for data linking. Panels lock together with an easy to use quick release panel lock. Rigging bars are also available for dead hang installation (m10 thread on the rear for a Pro Clamp so units can easily be fastened to truss or 2-inch pipe).

3D Vision Plus

3D Vision Plus ​​

3 Operating Modes: Sound Active Mode (with Sound Sensitivity Adjustment), Auto Run Mode (16 Programs with Speed Adjustment), DMX Control
3 DMX Channel Modes: 3 Channel Mode, 9 Channel Mode, and 13 Channel Mode
Master/Slave Set Up
PowerCON In/Out Connections
RJ45 In/Out Connections
Digital Display
4-Button Control
Beam Angle: 180 Degrees
LED Quantity: 72 Pieces 3-in-1LEDs
Weight:  6 lbs./ 2.74Kgs.
Dimensions: 3.16” (L) x 15.93” (W) x 13.80” (H)
80.5 (L) x 404.7 (W) x 350.7 (H) mm

Allegro Z6

Allegro Z6​​

The ADJ Allegro Z6 is a linear fixture that features 6 lenses, motorized zoom and motorized tilt (220-degrees) on the X axis. It’s powered by six 30W Quad (4-IN-1) RGBW LEDs. Each LED’s color may be controlled individually. The fixture’s beam angle is adjustable between 3.5-degrees and 38-degrees.

The Allegro Z6 has a 4-button function display, 5-pin DMX In/Out to link data and locking power connectors to daisy chain power. The fixture also has RJ45 In/Out connections for Art-Net and Kling-Net control. There is a convenient USB input for updating the fixture’s firmware. 

Flash Kling Batten

Flash Kling Batten​​

Features:
- LED Pixel panel for, low resolution, video displays
- 160 x 0.164W SMD RGB 3-in1 LED’s (40x4 Matrix Configuration)
- 120-Degree Beam Angle
- KlingNet and ArtNet compatible. Recommended control solutions; Arkaos Media Master Express, Media Master Pro and LED Master software’s (sold separately).
- RJ45 Connection
- Electronic Dimming 0-100% (via software)
- AC 100V-240V 50/60Hz
- Power Cord Daisy Chain up to 12 fixtures max.
- Power Consumption: 54W
- Dimensions (LxWxH): 39.25” x 4” x 5.5” / 1000 x 104 x 140mm
- Weight: 7.27 lbs. / 3.3 Kgs.

FLash Kling Strip

FLash Kling Strip​​

Features:
- LED Pixel panel for, low resolution, video displays
- 80 x 0.164W SMD RGB 3-in1 LED’s (40x4 Matrix Configuration)
- 120-Degree Beam Angle
- KlingNet and ArtNet compatible. Recommended control solutions; Arkaos Media Master Express, Media Master Pro and LED Master software’s (sold separately).
- RJ45 Connection
- Electronic Dimming 0-100% (via software)
- AC 100V-240V 50/60Hz
- Power Cord Daisy Chain up to 22 fixtures max.
- Power Consumption: 28W
- Dimensions (LxWxH): 39.25” x 2.25” x 5.5” / 1000 x 59 x 140mm
- Weight: 6 lbs. / 2.7 Kgs.


Anolis

ArcDot™

Anolis ArcDot

Excellent for large scale matrix applications due to its advanced pixel mapping capabilities, the ArcDot™ uses a Cree MC-E RGBW MultiChip with high light output that features a built-in intelligent electronic control system. This guarantees flicker free operation and overheating protection whilst remote addressing, calibration and status messaging is also included. Built to an IP67 rating ensures the unit is capable of withstanding tough weather conditions but is also perfect for a wide variety of interior installations.

ArcPix™

Anolis ArcPix

Perfect for complex pixel mapping and media effects on structural surfaces, the ArcPix™ from Anolis is suitable for both interior and exterior applications. The plug and play electronics allow for up to 400 units to be combined with a single ArcPixel™ Power unit, giving lighting designers great flexibility to create dramatic visual effects in a variety of colours. The IP67 rating ensures the fixtures are tough enough to withstand the harshest environmental conditions, giving optimum performance for many years.

ArcSource™ Outdoor 16MC Pixel

ArcSource™ Outdoor 16MC Pixel

Deliver complete control of landscaping and structural illuminations with the Anolis Pixel driving system. Individually control each Pixel fixture to deliver stunning visual effects across a huge variety of installations. Four high power MultiChip LEDs provide over 1000 lumen output and the broad range of optic and colour variants give great variety to the scope of projects the fixtures are suitable for. The robust design and solid construction means the fixture is IP67 rated and tough enough to withstand the harshest weather conditions.

ArcSource™ Outdoor 4MC Pixel

ArcSource™ Outdoor 4MC Pixel

Create controlled, beautiful and dramatic media style effects on landscapes and facade installations with the ArcSource™ Outdoor 4MC Pixel. Each fixture can be individually controlled to alter colour, dimming and intensity to produce stunning effects. Combining high light output, multiple beam angles, precision optics and a high IP rating makes the fixtures suitable for a massive range of applications.

ArcPower™ Rack Unit Pixel

ArcPower™ Rack Unit Pixel

The ArcPower™ Rack Unit integrates the latest technology to offer even greater performance in terms of both efficiency and flexibility. Capable of producing both 48v and 28v as outputs, allows for the unit to be used globally with no power compatibility issues. The 8 outputs allow you to power fixtures efficiently and economically, especially when using pixel based fixtures.

ArcPixel™ Power

ArcPixel™ Power

Powering the full range of Pixel controlled Anolis products, the ArcPixel™ Power allows a large quantity of products to be connected simultaneously whilst Auto Addressing makes installation and set up easy. Compatible with both DMX and Art-Net protocols, the integration with media servers allows complex media programming, giving dynamic pixel control. The unit includes an integrated web interface allowing a quick overview of many settings via a connected PC. When pixel control is demanded by your project, ArcPixel™ Power provides the most effective and simple solution.


Ayrton


INTELLIPIX-R

INTELLIPIX-R

The INTELLIPIX™-R is quite a special luminaire in the RADICAL range. Not only is the only nonmoving light but it has been under developement for over four years and marks the long awaited creation of ultra intensive optics. In fact, only large-sized optics paired with reduced light emitting surface RGBW multi-chip LED could meet the specifications and enable the creation of volumetric colour graphic effects.


MAGICBLADE-R

MAGICBLADE-R

The MAGICBLADE™-R is a new design that just like the MAGICPANEL™ offers continuous double rotation on PAN/TILT axes. What sets this luminaire apart, is the layout of the in-line light sources paired with the highly intensive angle of the optics, which allows the creation of light curtains with genuine overall consistency. In fact, on stage, the creation of virtual décors requires very high centre beam luminous intensity to enable excellent visual perception in an environment saturated with light. The possibility of installing the product in any position and the individual control of the 7 RGBW LED sources allows for the creation of a multitude of new effects.


MAGICPANEL-R

MAGICPANEL-R

The MAGICPANEL-R™ represents a declension pattern over the famous MAGICPANEL™602, which has enjoyed huge international success since its launch at Prolight+Sound 2013. The integration of the features specific to the RADICAL range paired with continuous double rotation on two axes and a 5 X 5 matrix with a central point once again allows us to push the boundaries of imagination.


MAGICRING-R9

MAGICRING-R9

The MAGICRING™R9 is the most powerful and extravagant luminaire in this new range. It is also the most RADICAL in terms of its dimensions, but especially due to its excessiveness. With an overall flux of 29,000 lumen and a centre beam luminous intensity of more than 3,200,000 candelas, it is reserved for extreme uses. Just like the MAGICBLADE™R and the MAGICPANEL™R, it offers double continuous rotation on PAN/TILT axes, which is controlled by powerful three-phase stepper motors.

 


Cameo


KLING® TILE 144

Kling tile 144

The Kling® Tile 144 is a square video and pixel mapping panel with 144 tri-colour SMD 5050 LEDs in a 12 x 12 array, 25 millimeter pixel pitch and wide 120° viewing angle. It provides superb RGB colour rendering, flicker-free performance with a 3,400 Hz refresh rate and includes four interchangeable LED cover plates (clear, frost, milk and black). The Kling® Tile is automatically configured and easily controlled using the ArKaos Kling-Net protocol. It is Art-Net 3 compliant and sports 8-channel and 432-channel DMX modes with single pixel control, strobe and dimming functions plus automated standalone modes. The black anodized aluminium housing features efficient convection cooling and a secure hardware linking system for seamlessly interlocking tile combinations. It integrates 3-pin DMX and RJ45 Ethernet inputs and outputs, blue and white power connectors and a 4-button display for manual configuration. The Kling® Tile 144 comes with a power cord and adjustable mounting bracket.

 


CHAUVET® Professional


ÉPIX™ Drive 642

Epix drive 642

ÉPIX™ Drive 642 hosts the processing and power supply for the EPIX™ 2.0 product line in one convenient device. It controls up to 16 ÉPIX™ Strip 2.0 or 4 ÉPIX™ Bar 2.0 easily using Art-Net (3.0 compliant) or Arkaos Kling-Net. Configuration and setup is fast, easy with its built-in LCD display. Additionally, you can manage configuration and software updates with a network-based remote web server.

​ÉPIX™ Strip

CHAUVET Professional EPIX Strip ArKaos Kling-Net Fixture

CHAUVET® Professional ÉPIX™ Strip is a one-pixel wide strip light, featuring 40 tri-colored SMD LEDs, designed for video and pixel-mapping applications with countless layout options. By allowing the automatic configuration of real-time video data, Kling-Net removes the complexity of setting up standard LED displays and thus speeds and eases the process.

​ÉPIX™ Strip 2.0

CHAUVET Professional EPIX Strip 2.0 ArKaos Kling-Net Fixture

CHAUVET® Professional ÉPIX™ Strip 2.0 is a pixel mapping, one-meter strip that sets up in minutes with minimal technical know-how. Each strip houses 40 tri-colored SMD 5050 LEDs, and has a pixel pitch of 25 millimeters and 120-degree viewing angle. With multiple control options—industry standard Art-Net and Arkaos Kling-net—pixel mapping displays are achieved in minutes. Works seamlessly with ÉPIX™ Bar 2.0 and uses EPIX™ Drive 642 for data and power distribution.

​ÉPIX™ Bar 2.0

CHAUVET Professional EPIX Bar 2.0 ArKaos Kling-Net Fixture

CHAUVET® Professional ÉPIX™ Bar 2.0 is a pixel mapping, one-meter bar that sets up in minutes with minimal technical know-how. Each bar houses 160 tri-colored SMD 5050 LEDs, and has a pixel pitch of 25 millimeters and 120-degree viewing angle. Pixel mapping displays are achieved in minutes using multiple control options—industry standard Art-Net and Arkaos Kling-net. Works seamlessly with ÉPIX™ Strip 2.0 and uses EPIX™ Drive 642 for data and power distribution. 

ÉPIX™ Tile 2.0.

Epix Tile 2.0.

ÉPIX™ TILE 2.0 is a 12-inch square tile of 144 tri-color SMD 5050 LEDs, in a 12 x 12 pixel array. The ÉPIX™ Tile 2.0 has a 25-millimeter pixel pitch with a 120° viewing angle and can be set up and configured in minutes with little technical expertise. The integrated, interlocking, and load bearing hardware easily supports the ÉPIX™ Tiles in a number of suspended and ground supported combinations. The ÉPIX™ Tile 2.0 uses the ÉPIX™ Drive 642 for power and data, and can be combined seamlessly with all other ÉPIX™ 2.0 products using the interlocking hardware.

 

Next NXT-1

Next NXT-1

Next™ NXT-1 is a moving head LED panel with 25 pixel-mappable quad-color RGBW LEDs that brilliantly display pixel mapped images and punch through haze. The fast movement of the panel and rapid response of the narrow-beam LEDs let designers create engaging eye candy that enhances any live production. Next™ NXT-1 comes with built-in dynamic and static patterns and alpha-numeric characters for easy programming. Next™ NXT-1 runs on Art-Net™, Kling-Net, and DMX protocols; and can be controlled with lighting consoles or media servers, providing the ultimate in flexible control integration options.

Nexus™ 2x2

CHAUVET Professional Nexus 2x2 ArKaos Kling-Net Fixture

CHAUVET® Professional Nexus™ 2x2 is a 4-cell COB RGB LED fixture designed for building scalable pixel mapping displays. Combine with Nexus™ 4x4 and Nexus™ 4x1 for larger geometric displays that aptly demonstrate its pixel-mapping capability and diffused yet richly saturated colored light.

Nexus™ 4x4

CHAUVET Professional Nexus 4x4 ArKaos Kling-Net Fixture

CHAUVET® Professional Nexus™ 4x4 is both a bold eye-candy and a tour-ready wash light capable of delivering at once the sizzle of a pixel-mapping display and a robust light output afforded by 16 20-watt RGB COB LEDs. The combination of COB emitters and a clever reflector yields a striking, diffused light richly drenched in saturated hues.

Nexus™ 4x1

CHAUVET Professional Nexus 4x1 ArKaos Kling-Net Fixture

CHAUVET® Professional Nexus™ 4x1 is a 4-cell COB RGB LED fixture designed for building scalable pixel mapping displays. Mount to the top and bottom of Nexus™ 4x4 to enlarge its footprint, or link to each other for linear effects. Nexus™ 4x1 is perfect for installation on steps or lining the front of a stage.

Nexus™ Aq 5x5

Nexus Aq 5x5

A new addition to our family of pixel mapping displays, The Nexus™ Aq 5x5 LED system is made for the stage and studio. A truly versatile LED system, Nexus™ Aq 5x5 projects narrow beams of light, provides full color mixing washes, makes instant audience blinders, and displays impactful text and vivid animated graphics in full RGBW color. Nexus™ Aq 5x5’s smooth dimming curve and mounting versatility make it a perfect application into live events, broadcast, studio, theatre, and touring applications.

Nexus™ Aw 7x7

Nexus Aw 7x7

The Nexus™ Aw 7x7 LED panel wall system is a truly versatile LED system that projects narrow beams of light, provides warm washes, makes instant audience blinders, and displays impactful text and vivid animated graphics. Powerful Cree LEDs partnered with a flexible software system generate stunning pixel mapping effects. A smooth dimming curve with a 2800 K color temperature makes it perfect for live events, broadcast, studio, theatre, and touring applications.


Claypaky

HY B-EYE K25

HY B-EYE K25​​

HYper Power of Evolution: The new LEDwash benchmark

The B-EYE has revolutionized the way we think of LED show lighting. Its innovative optical unit enhances the uniformity and efficiency of the light output. The rotating front lens and the possibility to control each single LED individually have made spectacular kaleidoscopic projections and charming eye candy effects possible. A sophisticated effect engine has made it easier to routinely use macro effects, which would otherwise be difficult to program. These technological innovations make the B-EYE a versatile product: it is a high-performance LED wash light, a perfect beam light, and a spectacular visual effect projector all in one. It has won several awards and been copied by countless manufacturers over the years.

Today Claypaky offers HY B-EYE, that is TWICE MORE POWERFUL and bright than B-EYE. It even offers more VERSATILITY and more INTERACTIVITY with the media servers (Kling-Net protocol included), it is very SILENT while featuring the same size and same control mode as the B-EYE.

HY B-EYE K15

HY B-EYE K15​​

HYper Power of Evolution: The new LEDwash benchmark

The B-EYE has revolutionized the way we think of LED show lighting. Its innovative optical unit enhances the uniformity and efficiency of the light output. The rotating front lens and the possibility to control each single LED individually have made spectacular kaleidoscopic projections and charming eye candy effectspossible. A sophisticated effect engine has made it easier to routinely use macro effects, which would otherwise be difficult to program. These technological innovations make the B-EYE a versatile product: it is a high-performance LED wash light, a perfect beam light, and a spectacular visual effect projector all in one. It has won several awards and been copied by countless manufacturers over the years.

Today Claypaky offers HY B-EYE, that is TWICE MORE POWERFUL and bright than B-EYE. It even offers more VERSATILITY and more INTERACTIVITY with the media servers (Kling-Net protocol included), it is very SILENT while featuring the same size and same control mode as the B-EYE.


DMT


Controller Pixelstrip MKII

DMT Controller Pixelstrip MKII

The Pixel strip controller MKII is necessary to give power and data to the Pixelstrip MKII. It's a dedicated controller and the strips cannot be controlled without it. The controller has a Klingnet in- and output RJ-45 for easy daisy chaining your klingnet setup. It has 4x RJ-45 outputs. Each output can be set for 1 – 4 strips which counts a total of 16 strips for one controller. The controller has DMX, Klingnet and Artnet. Klingnet and Artnet to use for full pixelcontrol and DMX to control the built in programs. The 2x18 character display makes it easy to set network and fixture settings.

PixelStrip P25 MKII

DMT PixelStrip P25 MKII

The Pixelstrip P25 MKII is slim strip with only a Ethernet RJ-45 in- and output to connect in a daisy chain setup together with the dedicated pixel strip MKII controller. The MKII controller is equipped with Klingnet, DMX and Artnet. This makes it possible to use the strips with a wider range of controllers and software. The DMT Pixelstrip P25 MKII contains 40 pixels with a pitch of 25mm. The pixels are mounted in a configuration of 1x40. It has a sliding bracket for flexible rigging and the possibility to connect multiple strips in vertical position to eliminate gaps in between. Each batten should always be rigged separately. Use the Strip in combination with the Tile and the batten to make creative visual setups.

PixelBatten P25 MKII

DMT PixelBatten P25 MKII

The PixelBatten P25 MKII is more versatile then it's predecessor. Now it is equipped with not only Klingnet, but also DMX and Artnet onboard. This makes it possible to use the PixelBatten with a wider range of controllers and software. It has two Ethernet RJ-45 ports with built-in switch for linking Klingnet or Artnet. Powercon in/out and DMX in/out for daisy chain power and data. The 2x18 character display makes it easy to set network and fixture settings. The DMT Pixelbatten P25 MKII has a length of 1m and contains 160 pixels with a pitch of 25mm. The pixels are mounted in a configuration of 40x4 pixels. It has a sliding bracket for flexible rigging and the possibility to connect multiple battens in vertical position to eliminate gaps in between. Each batten should always be rigged separately. Use the batten in combination with the strip and the tile to make creative visual setups.

Pixel Tile P25 MKII

DMT Pixel Tile P25 MKII

The Pixeltile P25 MKII is a square 300x300mm pixel fixture. It is equipped with Klingnet, Artnet and DMX protocol. This makes it possible to use the Pixel tile with a wide range of controllers and software. It has two Ethernet RJ-45 ports with a built-in switch for linking Klingnet or Artnet. Powercon in/out and DMX in/out for daisy chain power and data. The 2x18 character display makes it easy to set network and fixture settings. The DMT Pixeltile P25 contains 144 pixels with a pitch of 25mm. The pixels are mounted in a configuration of 12x12. It has a sliding bracket for flexible rigging and the possibility to connect multiple battens in vertical position to eliminate gaps in between. Each batten should always be rigged separately. Use the Tile in combination with the strip and the batten to make creative visual setups. The Pixeltile also has the same measurements as the Showtec White pix which makes them easy to combine in a grid.


Elation Professional


EZ Kling

EZ Kling

The new EZ KLING™ is an RJ45 to DMX, KlingNet™, and ArtNet™ interface, which allows you to pixel map KlingNet™ and DMX compatible fixtures through the KlingNet™ mapper included in Media Master Express™ and Media Master Pro™ (Zeus). Ideal for use with Flex Pixel Tape™ and LED Pixel controllable DMX fixtures. One EZ KLING™ interface will drive up to 600 Flex Pixel RGB pixels using KlingNet™ control protocol or 170 DMX Pixels via ArtNet™/ DMX control. Includes a magnet on the back panel for easy metal surface mounting and a mini omega bracket for clamp/truss mounting.


COLOUR Chorus 12

Colour chorus 12

The new COLOUR CHORUS™ series is available in 1 (0.3m), 2 (0.6m), 4 (1.2m), and 6 foot (1.8m) fixture lengths, featuring long life individual 3W (Red, Green, Blue, Amber) LEDs, 100,000 hour average LED life, individual hue, saturation, and intensity control, LED group control, variable dimming curve modes, strobe and chase effects, ArtNet™, KlingNet™ and RDM (remote device management) protocol support, 3pin and 5pin DMX, powerCon, and RJ45 in/out connections, LCD menu display with 4 button control panel, integrated rigging brackets, multiple unit power linking, rugged die-cast aluminum exterior, flicker free operation for TV and FILM, and a multi-voltage universal auto switching power supply (110-240v).

 

COLOUR Chorus 24

Colour chorus 24

The new COLOUR CHORUS™ series is available in 1 (0.3m), 2 (0.6m), 4 (1.2m), and 6 foot (1.8m) fixture lengths, featuring long life individual 3W (Red, Green, Blue, Amber) LEDs, 100,000 hour average LED life, individual hue, saturation, and intensity control, LED group control, variable dimming curve modes, strobe and chase effects, ArtNet™, KlingNet™ and RDM (remote device management) protocol support, 3pin and 5pin DMX, powerCon, and RJ45 in/out connections, LCD menu display with 4 button control panel, integrated rigging brackets, multiple unit power linking, rugged die-cast aluminum exterior, flicker free operation for TV and FILM, and a multi-voltage universal auto switching power supply (110-240v).

 

COLOUR Chorus 48

Colour chorus 48

The new COLOUR CHORUS™ series is available in 1 (0.3m), 2 (0.6m), 4 (1.2m), and 6 foot (1.8m) fixture lengths, featuring long life individual 3W (Red, Green, Blue, Amber) LEDs, 100,000 hour average LED life, individual hue, saturation, and intensity control, LED group control, variable dimming curve modes, strobe and chase effects, ArtNet™, KlingNet™ and RDM (remote device management) protocol support, 3pin and 5pin DMX, powerCon, and RJ45 in/out connections, LCD menu display with 4 button control panel, integrated rigging brackets, multiple unit power linking, rugged die-cast aluminum exterior, flicker free operation for TV and FILM, and a multi-voltage universal auto switching power supply (110-240v).

 

COLOUR Chorus 72

Colour chorus 72

The new COLOUR CHORUS™ series is available in 1 (0.3m), 2 (0.6m), 4 (1.2m), and 6 foot (1.8m) fixture lengths, featuring long life individual 3W (Red, Green, Blue, Amber) LEDs, 100,000 hour average LED life, individual hue, saturation, and intensity control, LED group control, variable dimming curve modes, strobe and chase effects, ArtNet™, KlingNet™ and RDM (remote device management) protocol support, 3pin and 5pin DMX, powerCon, and RJ45 in/out connections, LCD menu display with 4 button control panel, integrated rigging brackets, multiple unit power linking, rugged die-cast aluminum exterior, flicker free operation for TV and FILM, and a multi-voltage universal auto switching power supply (110-240v).

 

CUEPIX Batten

Cuepix Batten

The new CUEPIX Batten™ features (10) long life 30W 3-in-1 RGB COB LEDs, 100,000 average hour LED life, 82° beam and 106° field angles, individual control of each COB module, variable dimming curve modes, strobe and chase effects, ArtNet™, KlingNet™ and RDM (remote device management) protocol support, 3pin and 5pin DMX, powerCon, and RJ45 in/out connections, LCD menu display with 4 button control panel, integrated rigging bracket, multiple unit power linking, rugged die-cast aluminum exterior, flicker free operation for TV and FILM, 312W max power consumption, and a multi-voltage universal auto switching power supply (110-240v).

 

 

CUEPIX Panel

Cuepix Panel

The new CUEPIX Panel™ features (25) long life 30W 3-in-1 RGB COB LEDs, a 60° beam angle, RDM (Remote Device Management), individual control of each COB module, variable / selectable dimming curves, strobe and zone chase effects, flicker free operation for TV and Film, ArtNet™, KlingNet™ and RDM (remote device management) protocol support, 3pin and 5pin DMX and powerCon in/out connections, LCD menu display with 4 button control panel, integrated rigging points and optional rigging bracket available, and a multi-voltage universal auto switching power supply (100-250v).

 

CUEPIX Par 300

Cuepix Par 300

The new CUEPIX Par 300™ features (7) long life 30W 3-in-1 RGB COB LEDs, 100,000 average hour LED life, 15° beam angle, individual control of each COB module, variable dimming curve modes, strobe and chase effects, ArtNet™, KlingNet™ and RDM (remote device management) protocol support, 3pin and 5pin DMX, powerCon, and RJ45 in/out connections, LCD menu display with 4 button control panel, integrated rigging bracket, multiple unit power linking, rugged die-cast aluminum exterior, flicker free operation for TV and FILM, and a multi-voltage universal auto switching power supply (110-240v).

 

SIX Bar 500

Six bar 500

The new SIXBAR 500™ features (6) 12W 6-IN-1 RGBAW+UV LEDs, 100,000 average hour LED life, 30° beam angle, individual control of each LED, variable dimming curve modes, strobe and chase effects, a UV wavelength of 395nm, ArtNet, KlingNet and RDM (remote device management) protocol support, 3pin and 5pin DMX, powerCon, and RJ45 in/out connections, LCD menu display with 4 button control panel, integrated dual rigging brackets, multiple unit power linking, rugged die-cast aluminum exterior, frost filter and glare shield included, flicker free operation for TV and FILM, 93W max power consumption, and a multi-voltage universal auto switching power supply (110-240v).

SIX Bar 1000

Six bar 1000

The new SIXBAR 1000™ features (12) 12W 6-IN-1 RGBAW+UV LEDs, 100,000 average hour LED life, 30° beam angle, individual control of each LED, variable dimming curve modes, strobe and chase effects, a UV wavelength of 395nm, ArtNet, KlingNet and RDM (remote device management) protocol support, 3pin and 5pin DMX, powerCon, and RJ45 in/out connections, LCD menu display with 4 button control panel, integrated dual rigging brackets, multiple unit power linking, rugged die-cast aluminum exterior, frost filter and glare shield included, flicker free operation for TV and FILM, 145W max power consumption, and a multi-voltage universal auto switching power supply (110-240v).

ACL CURTAIN

ACL CURTAIN

The ACL CURTAIN™ is a versatile batten luminaire featuring (14) individual 15W RGBW 4-in-1 LEDs and the new advanced collimator optic lens, producing a laser-like homogenized 4° color-changing beam from each lens which combined produce a 53° beam angle. Features include full individual pixel control, strobe, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™ and Art-NET support, 3/5pin XLR, powerCON, and RJ45 ethernet in/out connections, (4) button control full color 180° reversible menu display, 240W max power consumption, a multi-voltage universal auto switching power supply (100-240v), and included glare shield and frost filter.

ACL 360 BAR

ACL 360 BAR

The ACL 360 BAR™ is a versatile moving bar effect luminaire featuring (7) individual 15W RGBW 4-in-1 LEDs and the new advanced collimator optic lens, which combined produce a laser-like homogenized 4° color-changing beam from each lens which combined produce a 31° beam angle. Features include fast and precise16-bit continuous full 360° pan and tilt rotation, full individual pixel control, strobe, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™ and Art-NET support, 3/5pin XLR, powerCON, and RJ45 ethernet in/out connections, (6) button control full color 180° reversible menu display, 135W max power consumption, and a multi-voltage universal auto switching power supply (100-240v).

ACL 360 MATRIX

ACL 360 MATRIX

The ACL 360 MATRIX™ is a versatile moving head effect luminaire featuring (25) individual 15W RGBW 4-in-1 LEDs and the new advanced collimator optic lens, which combined produce a laser-like homogenized 4° color-changing beam from each lens. Features include fast and precise16-bit continuous full 360° pan and tilt rotation, full individual pixel control, strobe, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™ and Art-NET support, 3/5pin XLR, powerCON, and RJ45 ethernet in/out connections, (6) button control full color 180° reversible menu display, 425W max power consumption, and a multi-voltage universal auto switching power supply (100-240v).

ACL 360 ROLLER

ACL 360 ROLLER

The ACL 360 ROLLER™ is a unique moving head effect luminaire featuring a total of (20) individual 15W RGBW 4-in-1 LEDs positioned equally on four individual arrays attached together. Features include the new advanced collimator optic lens that produces a 4° laser-like homogenized color changing beam from each LED which combined produce a 21° beam angle from each bar, fast and precise16-bit continuous full 360° pan and tilt rotation, full individual pixel control, strobe, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™ and Art-NET support, 3/5pin XLR, powerCON, and RJ45 ethernet in/out connections, (6) button control full color 180° reversible menu display, 280W max power consumption, and a multi-voltage universal auto switching power supply (100-240v).

ACL 360i

ACL 360i

The ACL 360i™ is an amazing single beam moving effect luminaire featuring a single 60W RGBW 4-in-1 LED and the new advanced collimator optic lens, which produces a laser-like homogenized 4° color-changing beam. Features 10 and 45 degree frost lens options (included), fast and precise16-bit continuous full 360° pan and tilt rotation, strobe, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™ and Art-NET support, 5pin XLR, powerCON, and RJ45 ethernet in/out connections, (6) button control full color 180° reversible menu display, 110W max power consumption, and a multi-voltage universal auto switching power supply (100-240v).

ACL BAR

ACL BAR

The ACL BAR™ is a versatile bar luminaire featuring (7) individual 15W RGBW 4-in-1 LEDs and the new advanced collimator optic lens, producing a laser-like homogenized 4° color-changing beam from each lens which combined produce a 31° beam angle. Features include full individual pixel control, strobe, and selectable dimming curve effects, DMX, RDM, KlingNET™ and Art-NET (DMX Over Ethernet) Support, 3/5pin XLR, powerCON, and RJ45 ethernet in/out connections, (4) button control full color 180° reversible menu display, 135W max power consumption, a multi-voltage universal auto switching power supply (100-240v), and included glare shield and frost filter.

ACL PAR 200

ACL PAR 200

The ACL PAR 200™ is a versatile par luminaire featuring (7) individual 15W RGBW 4-in-1 LEDs and the new advanced collimator optic lens, producing a laser-like homogenized 4° color-changing beam from each lens which combined produce a 11° beam angle. Features include full individual pixel control, strobe, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™ and Art-NET support, 3/5pin XLR, powerCON, and RJ45 ethernet in/out connections, (4) button control full color 180° reversible menu display, 135W max power consumption, a multi-voltage universal auto switching power supply (100-240v), and included glare shield and frost filter.

DTW BAR 1000

DTW BAR 1000

The new DTW BAR 1000™ features (12) 10W multi-chip CW / WW / Amber LEDs, 28° beam angle, full color temperature range control (2,700K - 6,500K) plus independent Dim-to-Warm channel control (1,800K - 3,200K), pixel control, variable dimming curve modes, strobe and chase effects, ArtNet, KlingNet and RDM (remote device management) protocol support, DMX, RJ45, and power in/out connections, LCD menu display with 4 button control panel, integrated dual rigging brackets, multiple unit power linking, rugged die-cast aluminum exterior, frost filter and glare shield (included), flicker free operation for TV and FILM, and a multi-voltage universal auto switching power supply (110-240v).

ZCL 360i

ZCL 360i

The ZCL 360i™ is a powerful single beam moving effect luminaire with zoom featuring a single 90W RGBW 4-in-1 LED and the new advanced collimator optic lens, which produces a laser-like homogenized 4° color-changing beam. Features 4° to 44° motorized zoom, fast and precise16-bit continuous full 360° pan and tilt rotation, electronic strobe, dimmer, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™, and Art-NET support, 5pin XLR, RJ45 etherCON, and powerCON in/out connections, (7) button control full color 180° reversible menu display, multiple unit power linking, flicker free operation for TV and FILM, and a multi-voltage universal auto switching power supply (100-240v).

ZCL 360 BAR

ZCL 360 BAR

The ZCL 360 BAR™ is a versatile moving bar effect luminaire with zoom featuring (5) individual 60W RGBW 4-in-1 LEDs and the new advanced collimator optic lens, which produces a laser-like homogenized 4° color-changing beam from each lens. Features 4° to 44° motorized zoom, pixel control, fast and precise 16-bit continuous full 360° pan and tilt rotation, strobe, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™ and Art-NET support 3/5pin XLR, RJ45 etherCON, and powerCON in/out connections, (7) button control full color 180° reversible menu display, multiple unit power linking, flicker free operation for TV and FILM, and a multi-voltage universal auto switching power supply (100-240v).


ENTTEC


Pixelator Mini

Pixelator Mini

Mini version of ENTTEC’s world-leading Pixelator

Just when you thought superb Ethernet to Pixel Link conversion couldn’t get any more compact, along comes Pixelator Mini. Control up to 2720 pixels using 16 universes of Ethernet


Infinity


iPW-150 LED Sunpanel

Infinity iPW-150 LED Sunpanel

The Infinity® Sunpanel is a LED blinder panel with 150 x 3W Osram OSLON LEDs, arranged in a 10x15 matrix and pixel pitch of 80mm. The 25,5mm narrow lenses and its powerful 2400° Kelvin 3W LEDs, create a wall of punchy blinders, generating amazing volumetric graphics. Each LED is driven by state-of-the-art drivers, offering a perfectly smooth dimming curve from zero to full on, without any gaps or steps.

Its rugged mesh construction, with 6 detachable modules, enables various creative possibilities by placing other fixtures behind or through the mesh panel. Furthermore, the dedicated rigging bar, which can hold 6 Sunpanels, allows you to set an angle up to 15° in both directions between individual panels (in steps of 5°).

The Infinity® Sunpanel is IP-54 certified and equipped with Neutrik PowerCON TRUE1 and Neutrik 3 & 5-pole waterproof chassis connections. It can be controlled by DMX, but it also has RDM and Artnet functionalities (for an easy setup for Arkaos VJ software, the Klingnet protocol has been integrated too).

A built-in Ethernet switch makes it possible to easily daisy chain your data network, where other, external switches or routers, are no longer needed. All settings are created easily via an intuitive menu structure on a large color display.

When a new level of brightness is needed, the Infinity® Sunpanel is the ultimate tool for light designers.

iM-2515

Infinity iM-2515

The Infinity® iM-2515 is a 5x5 Matrix; fully pixel controllable and continuous rotating possibilities on both pan and tilt, allowing for maximum creativity and control.

It offers an enormous light output because of the Osram O-Star RGBW LEDs in combination with the high grade optical system at a beam angle of just 4.5°. Whether you need to create dynamic effects, breath-taking visuals or just massive solid beams; the Infinity® iM-2515 is the right tool for every job.

iW-1915 Pixel

Infinity iW-1915 Pixel

The Infinity® iW-1915Pixel combines all benefits of the already popular iW-1915 with full pixel control, allowing boundless creativity for lightshows and multimedia experiences.

A clear high grade lens plate with excellent optics ensures a perfect color mix at any zoom position and can create stunning aura effects.

The wide linear zoom function, starting from 7° up to 50°, allows you to use the fixture either as beam effect or wash light. Also the iW-1915Pixel is equipped with high torque motors to ensure fast movements.


LMP


Litecraft CPIX.4

Litecraft CPIX 4

The LITECRAFT CPiX.4 is a univselles LED device that equally provides an excellent matrix effect, as can also be optionally used as multifunctional deployable wash light or as a blind man.
The CPiX.4 based on 16 COB LEDs, arranged in a 4 x 4 matrix, with each 30 W total power. Each COB chip is fitted in the colors RGB, and thus provide superior flexible mix the desired color. In addition, the unit via DMX can operate in a smart white mode, which allows to adjust the color temperature continuously.
Because of its wide coverage pattern and the high-quality whites, the LITECRAFT CPiX.4 is also suitable for scale illumination of stages and decorations.
CPiX.4 can optionally be controlled via DMX or ArtNet. The appliance allows a generous display is for all the important settings.


Litecraft LPiX.4

LITECRAFT LPiX.4

LPiX.40 is a creative tool that belongs to the well known LITECRAFT X-series. Due to its 40 singlepix LEDs LPiX.40 is perfect to use in all video applications. Thank to its compact size and light weight it can be used easily in decorations or on truss systems. Therefor the yoke on the backside is easy to shift, position and to fix. The cableing is made by usual RJ 45 cable which ensures an easy and cost effective installation.
For the easy and fast installation LPiX.40 can be driven from the DPiX.4 controller by artnet protocol. The DPiX.4 supplies also power due RJ45. By 4 outputs up to 16 pieces of LPiX.40 can be used by one DPiX.4.
LPiX.40 is supplied with a frosted cover as standard, which can be easily changed to a clear cover, included in delivery.


Litecraft DPiX.4

LITECRAFT DPiX.4

The DPiX.4 is the control unit for the LPiX.40. The compact unit can handle up to 16 units of LPiX.40 controlled by artnet. It is not just doing all address settings and signal distribution but also supply power to the units to guarantee trouble-free operation.

Litecraft TPIX.7

The LITECRAFT TPiX.7 is a matrix beam effect. The "T" in the name stands for "tungsten", which accounts for the warm colour temperature of 2,700° kelvin. The panel is armed with a total of 49 warm-white CREE LEDs equipped with a 7° optic that generates a "wall" of beams. Various dimmer curves imitate the dimming behaviour typical of a halogen lamp.The TPiX.7 not only offers a matrix effect but can also be used as an audience blinder. The 49 pixels can be controlled with complete freedom via DMX, ArtNet, Kling-Net or else using one of the integrated pixel macros.

Thanks to its robust housing, compact dimensions (50 x 50 cm) and electronics integrated into the panel, the TPiX.7 can be set up and dismantled rapidly and is recommended for touring applications. No further external control components are required for this product.

All the TPiX.7's key parameters can be set using the generous display.

.

LEDBLADE

CRE:ON Hybrid Drive

LedBlade

The LEDBLADE system powered by CRE:ON HD was developed specially for the event industry.
LEDBLADE creates depth of space or three-dimensionality: it enhances edges, expands the visual area or links together to create any geometric design.
Its new core, the CRE:ON HD unit is a power supply and a digital led strip controller card in one case serving as a “Hybrid Drive”.
Lighting Designers and operators can use whatever they’ve been accustomed to use day by day, eg.: a light console, a media server, or software to link with the IP-rated LEDBLADE system for both indoor and outdoor use.
The new LEDBLADE system powered by CRE:ON HD is easier to use and work with than any other LED Stripe system on the market to date making LEDBLADE literally


Jb lighting


Sparx 30

Sparx 30

The extremely bright (61 RGBW high-performance LEDs of 40 W each with a CRI > 85) and quiet as a whisper Sparx 30 delivers top performances in every respect – perfectly homogeneous illumination with excellent efficiency and minimal stray light.

Never before seen lighting and beam effects are achieved in combination with the innovative, segment by segment-controllable TwinZoom of 3°-70° and LED single-pixel control. Color gradients can also be realised to perfection as well as a breathtaking variety of variable beam characteristics.


Sparx 18

Sparx 18

The brilliant and versatile Sparx 18, with 37x 40W LED power, enables impressive washlight applications in completely innovative dimensions thanks to the innovative TwinZoom. The basic color temperature of the Sparx 18 is freely selectable and it runs extremely quietly thanks to special heatpipe cooling.

The optical system guarantees perfectly homogeneous illumination and enables fascinating color gradients with uniquely diverse beam effects and shapes from Soft Edge to Hard Edge for lighting design at its absolute best.


Luxibel


LX 109

LX 109

LUXIBEL - MATRIX PANEL 4x4 WITH HIGH OUTPUT TRI-COLOUR LEDS

LX 113

LX 113

LUXIBEL - 2x2 MATRIX PANEL WITH HIGH OUTPUT TRI-COLOUR LEDS (KLING-NET / ART-NET)

LX 120

LX 120

LUXIBEL - LUXIPIX 7x7 LED MATRIX - 3 W HIGH EFFICIENCY CREE LEDs

LED matrix module capable of projecting volumetric graphics.
The cutting-edge optic design combines warm white (2800 K) LEDs with special optical reflectors to create 8° narrow light beams. The generated effect is a wall of light, brighter than that of conventional LED screens.
The LUXIPIX is a 7x7 matrix of high efficiency CREE LEDs. The 50 x 50 cm panel has an on-board modular rigging system to build walls or matrixes in every size.
The innovative electric design and the quality of components and drivers result in a stepless and linear dimmer, equal in performance to that of halogen fixtures. This makes the device perfect for theatrical applications or wherever high performance dimming is required.
It is an ideal tool for rental companies: superslim, lightweight, and user friendly. Power supply and control electronics are on board, and it doesn't need an external driver. Use the graphic LCD display for standard operation, or use DMX or Kling-Net protocols for diagnostics and addressing.

LX 122

LX 122

LUXIBEL - LUXIPIX 5 x 5 RGBW LED MATRIX - OSRAM 10W LED (KLING-NET/ART-NET)
 
The LUXIPIX RGBW is a matrix composed of 5 x 5 high-efficiency OSRAM LEDs. It measures 50 x 50 cm and has an on-board modular rigging system to build walls or matrixes in every size.
It is an ideal tool for rental companies: superslim design, lightweight, user friendly, on-board power supply and control electronics, and no need for any external driver.
Generate a LED wall effect with strong and sharp beams that are brighter than conventional LED screens.
Equipped with an LCD display for user settings, diagnostics, and addressing.
Supports DMX and Kling-Net/Art-Net protocols.

LX 150

LX 150​​

LUXIBEL - PIXDRIVE KLING-NET/ART-NET

LX 151

LX 151​​

LUXIBEL - PIXSTRIP (KLING-NET / ART-NET)

Designed for video and pixel mapping applications

LX 152

LX 152​​

LUXIBEL PIXBAR - KLING-NET & ART-NET
 
Designed for video and pixel mapping applications

Prolights


Chromarock

Chromarock

The Chromarock LED moving head is based on a 5x5 matrix of high-lumen Osram Ostar RGBW/full colour LEDs, offering a limitless chromatic generation.

Chrompix

Chrompix​​

 Chrompix is the RGBW/full colour LED version with special optic reflectors which allow a unique reproduction of 6° tight light beams.

Halupix

Halupix

Halupix is a 7x7 matrix of high efficiency CREE LEDs with an on-board modular rigging system designed for arrangement into walls or matrixes in every size. These project sharp beams into the air which are brighter than conventional LED screens. 

Halurock

Halurock

The Prolights Halurock is based on a 7x7 matrix of high-lumen CREE Warm White LEDs, with a 2800K° colour temperature which recalls the classic effect of the halogen lamp in rock concert. 

 


ROBE


Spiider®

ROBE Spiider

Spiider, a superbright next generation of LED WashBeam luminaires, using 18x 30 Watt and 1x 60 Watt LEDs and combining it with a very efficient 12,5:1 zoom optical system ranging from tight 4° Beam to wide 50° Wash, makes the product the most powerful LED fixture on the market.

Beautiful convergence of hard edge in-air effects, punchy beams and smooth homogenized wash is all encapsulated in the unique Spiider.
Rich colors of 19 powerfull RGBW LEDs can create charming wash light with velvety smooth transitions thanks to internal 18bit LED dimming system.
Dynamic video effects are easily achieved by mapping individual pixels and controlled by DMX desk or media servers via sACN with internal HTP merging, DMX or by Kling-Net protocol.

Unique central piece with Robe exclusive Flower Effect is driven by 60W RGBW LED multichip for new innovative sharp multicoloured spikes of light, rotating in both directions at variable speed, adding another new visual effect to the show.


Linee™

ROBE Linee

The Linee produces a powerful zoomable blade of light, which either cuts through the air easily or creates beautiful soft wash light.

This continuously rotatable unit has a zoom range from 4° to 33° and each pixel can be individually controlled. The unit, which is well combinable with the Square and is of the same width, consists of a line of five 30W RGBW multichips. Turn The Linee into an effect light with the implemented Beam Effect Engines. The light output can be quickly turned into a dynamic ray of microbeams in the air. These Effect Engines can be rotated in both directions at variable speed. The product has ethernet pass through and implemented Kling-Net protocol for easy video mapping and control.


Square™

ROBE Square

The ROBE Square™ offers new exciting possibilities by combining video projection, pixel animations, beam effects and LED wash light all in a continuous rotation movement fixture.

LED matrix of 25 powerful RGBW multichips in pixel mappable array can be controlled via traditional RGB channels or via easy-to-use network driven application. Nine individually controllable effect engines can create beam effects or in-air animations. Five independent zooming layers offer unique possibilities of zoom waves and combination of wash coverage on the edges and beam effect in the center at the same time. Continuous rotation movement of pan and tilt offers creation of video as well as scenographical elements on the scene.


pixelPATT™

ROBE pixelPATT

Continuing the retro style lighting design, the pixelPATT is a new addition to the PATT family. In spite of its eye catching retro design, pixelPATT is based on modern LED pixel controlled technology.

The pixelPATT is composed of 7x 30W RGBW LED multi-chips, one in the centre surrounded by a ring of six, housed in a super-slim and lightweight brushed metal frame. Aesthetically it keeps the dimensions and attractive curvature of the PATT 2013 and the picklePATT, and this will also make it desirable for its physical appearance as well as for a light source. In order to make the pixelPATT elegant and a lightweight design, it has a remote Power and Data box PATT Driver, which is connected with the pixelPATT through an industry standard colour scroller cable with 4-pin XLR connectors.

The pixelPATT is an ideal fixture for television broadcasts, concerts, fashion shows or any type of event from awards to brand activations.


Showtec


Pixel Panel 1024

Showtec Pixel Panel 1024

The Showtec Pixel Panel 1024 is a 64x16 RGB Pixel panel matrix with Individual Pixel Control, suitable for indoor venues. It comes with an alignment plate, flexible rigging system and removable black frosted cover. This enables you to easily align multiple Pixel Panels in a row. The Pixel Panel 1024 is controllable by DMX, Master/Slave, Art-Net and Kling-Net, but can also be used as a stand-alone fixture with built-in programs.

Pixel Controller

Showtec Pixel Controller

The Showtec Pixel Controller is an easy-to-use four-output RGB pixel controller with dimmer function, suitable for controlling a variety of Pixel products, like the Pixelstrip 20/40, Pixeltube 16/32 and Pixel Dot. This controller is not only externally controllable by DMX, Master/Slave, Art-Net and Kling-Net, but can also be used as a stand-alone controller with built-in programs. Each of the 4 outputs can handle up to 4 m (13.1 ft) Pixelstrip, 5 m (16.4 ft) Pixeltube and 40 Pixel Dots. When using Art-Net, you are able to gain full control of all pixels to create stunning effects.

Pixelstrip 40

Showtec Pixelstrip 40

The Showtec Pixelstrip 40 is a 100 cm Pixelstrip with 40 individual controllable RGB pixels. It comes with standard black frosted cover, the front cover can be changed easily for the optional available: Acrylic Flat Cover Milky(44503) or Acrylic Dome Cover White(44505) Pixelstrip 40 only works with the dedicated Pixelcontroller (44510). All Pixelstrips can be daisy-chained easily and connected to the Pixel controller by a single Cat cable. You can use and mix Pixelstrip 40 & 20 anyway you want (up to 4 m. Pixelstrip per output port) Due to the flexible rigging-system it can be rigged easily to any structure, the side connecting plate allows users to align strips perfectly. Pixelstrip 40 is the perfect tool to create amazing effects.

Pixelstrip 20

Showtec Pixelstrip 20

The Showtec Pixelstrip 20 is a 50 cm Pixelstrip with 20 individual controllable RGB pixels. Pixelstrip 20 only works with the dedicated Pixelcontroller (44510). All Pixelstrips can be daisy-chained easily and connected to the Pixel controller by a single Cat cable. You can use and mix Pixelstrip 20 & 40 anyway you want (up to 4 m. Pixelstrip per output port) Pixelstrip 20 comes with standard black frosted cover. The front cover can be changed easily for the optional available: Acrylic Flat Cover Milky(44504) or Acrylic Dome Cover White(44506). Due to the flexible rigging-system it can be rigged easily to any structure and the side connecting plate allows users to align strips perfectly. Pixelstrip20 is the perfect tool to enhance your show!

Pixeltube 16

Showtec Pixeltube 16

The Showtec Pixeltube 16 is a daisy-chainable 50-cm (1.65 ft) long tube containing 16 individually controllable RGB pixels in a black frosted cover, suitable for creating stunning light effects. Driven by the dedicated Pixelcontroller, the Pixeltube 16 and Pixeltube 32 can be easily daisy-chained in any way you like through a single Cat cable up to 5 metres (16.4 ft) of total length per output port. Its flexible rigging system allows easy attachment to truss or 50-mm (2”) pipe without the need for tools. Two one-clamp-mounts and a 150 cm (4.9 ft) RJ45 cable are included.

Pixeltube 32

Showtec Pixeltube 32

The Showtec Pixeltube 32 is a daisy-chainable 100-cm (3.3 ft) long tube containing 32 individually controllable RGB pixels in a black frosted cover, suitable for creating stunning lighting effects. Driven by the dedicated Pixelcontroller, the Pixeltube 16 and Pixeltube 32 can be easily daisy-chained in any way you like through a single Cat cable up to 5 metres (16.4 ft) of total length per output port. Its flexible rigging system allows easy attachment to truss or 50-mm (2”) pipe without the need for tools. Two one-clamp-mounts and a 150 cm (4.9 ft) RJ45 cable are included.

Pixel Dot

Showtec Pixel Dot

The Showtec Pixel Dot is a daisy-chainable RGB LED dot with black housing and a white frosted 50 mm (2") cover, suitable for colour-mixing at fixed ceiling installations. Driven by the dedicated Pixel Controller, the Pixel Dot can be easily daisy-chained in any way you like by using a single Cat cable up to 40 units per Pixel Controller output and up to 160 Pixel Dots per controller. Equipped with spring clips, installing the Pixel Dots is just as easy as common recessed spotlights. A 50 cm (1.64 ft) RJ45 cable is included.

Pixel Bubble 75 set

Showtec Pixel Bubble 75 set

The Showtec Pixel Bubble 75 Set is a matrix of 75x 50 mm (2") white frosted RGB balls with Individual Pixel Control, suitable for creating a nice indoor visual effect. The set includes a 5-output PSU and 15 daisy-chainable 1-m (3.28 ft) strings, each equipped with 5 multi-colour LED balls. Additional strings are optional since each PSU-output can power to up to 6 daisy-chained strings. The Pixel Bubble 75 Set has an innovative rigging system for easy truss rigging. Also, it has multiple controlling options, like DMX, Master/Slave, Art-Net, Kling-Net and can be used as a stand-alone fixture with built-in programs.


Showtec NET-8/3

Showtec NET-8/3

The Showtec NET-8/3 and NET-8/5 nodes are cutting-edge network routing devices which convert Art-Net to DMX512 and back. A maximum of 4096 channels can be transported over a single CAT5. This makes the NET-8/x suitable for small to large scale events. The NET-8/x embeds a built-in network switch to allow it to be used as a Ethernet repeater as well as 8 isolated DMX512 universes which can be used as a input or output. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front.


Showtec NET-8/5

Showtec NET-8/5

The Showtec NET-8/3 and NET-8/5 nodes are cutting-edge network routing devices which convert Art-Net to DMX512 and back. A maximum of 4096 channels can be transported over a single CAT5. This makes the NET-8/x suitable for small to large scale events. The NET-8/x embeds a built-in network switch to allow it to be used as a Ethernet repeater as well as 8 isolated DMX512 universes which can be used as a input or output. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front.


Starway


Callisto

Starway Callisto

Callisto is a new generation LED bar equipped with 10 3W warm white LEDs 4° type "Beam" and 60 RGB 5050 LEDs arranged in a matrix offering a multitude of possibilities for creating images. Callisto can be controlled in DMX, in ArtNet, but also thanks to the innovative KlingNet protocol developed by Arkaos, which allows the interpretation of video data in real time.


Servo Pix 10K

Starway Servo Pix 10K

Servo Pix10K est une lyre wash équipée de 19 LEDs OSRAM 40W rouges, vertes, bleues et blanches pour une palette de couleurs encore plus étendue. Rapide et puissante, elle conviendra parfaitement à toutes prestations ou installations. Elle est également équipée d’un zoom rapide de 4°à 36°. Ses 19 LEDs peuvent être gérées indépendamment (pixel to pixel) pour générer des motifs, aussi bien grâce aux motifs internes qu’en gestion externe DMX, Art-Net ou Kling-Net.